Tri Axle 3x4

3x4 Axle Widening Low Loader

Designed and built from Grade 80 steel to suit 40tonne ATM, the TRT Tri Widener delivers a strong trailer with lighter tare weight. For maximum stability, the deck widens from 2.5m out to 3.5m, with three alternative pin locations to suit different machine widths. Gooseneck is designed to load machines further forward than other makes. Several options available including Top deck with alloy loading ramps.

  • TRT Trailing Beam Air Suspension
  • Grade 80 steel, strength with light tare
  • Deep Coaming Rail for minimal deflection
  • Steer Axle Options

 

DOWNLOADS

3x4 Deck Widening Low Loader

This trailer can be supplied with or without Top deck in both Dolly neck and Single pin options. Features extra deep coaming rail and Hi tensile full cross members for extra strength where it counts. Trailer shown has special axle group for additional payload. Designed for carrying wide loads on city roads or forestry roads.

  • 40tonne ATM
  • BPW Heavy Duty Air Suspension
  • Deep Coaming Rail for minimal deflection
  • Steer Axle Options

 

DOWNLOADS

3x4 Deck Widening Low Loader with Rear Steer

This trailer can be supplied with or without Top deck in both Dolly neck and Single pin options. Features extra deep coaming rail and Hi tensile full cross members for extra strength where it counts. Trailer shown has special axle group with rear axle steering for additional payload and manoeuvrability.

  • BPW Heavy Duty Air Suspension
  • 40tonne ATM
  • Deep Coaming Rail for minimal deflection
  • Steer Axle

 

DOWNLOADS

3x4 Mid Tipping Deck Low Loader

Designed specifically for the Roading Industry, the hydraulic Mid-Tipping deck allows Rollers and Access Equipment to be easily loaded onto the top deck. Top & bottom deck lengths are maximised to allow loading of 3 pieces of Roading equipment, multiple pieces of Access equipment, forklifts and any ‘hard to load’ machinery.

  • 40tonne ATM
  • 4.3m Top Deck, 9.3m Bottom Deck lengths
  • Beavertail and Ramp angle set at 9°
  • Double Fold Ramps

 

DOWNLOADS

Specification 116 KB Drawing 63 KB

3x4 Mid Tipping Widening Low Loader

Built to carry similar equipment as the 3x4 MTD trailer (above); however with the Bottom Deck widening. This trailer suits over width equipment and is capable of carrying a 30tonne excavator. Double fold full hydraulic ramps give an 8 degree loading angle. The Beaver Tail is a special radiused “no apex” design to reduce equipment hang up, invaluable for carrying low ground clearance Stock Picker trucks (3 wheeler forklifts).

  • BPW Heavy Duty Air Suspension
  • Bottom Deck widens from 2.5-3.5m
  • Non slip “Cold Grip” Deck Option
  • Paver Ramp Options

DOWNLOADS

Specifications 116 KB Drawings 95 KB

Tri-Axle Extendable Low Loader

This trombone design low loader features an extra low deck height to transport long and/or high structures, plant and machinery within legal limits. Trailer is shown with; optional demountable top deck wings, double fold ramps and insert decks for when extended.

  • 40tonne ATM
  • Deck length extends from 11m out to 15.2
  • Hendrickson Heavy Duty Air Suspension
  • Profiled Bar Coaming Rail for minimal deflection

 

DOWNLOADS

Specifications 222 KB Drawing 806 KB

Tri Axle Options

There are a number of different features and options available for Tri Axle Trailers. Contact our Trailer Team about any questions or added on extras that you may be interested in......

  • Double or Single Fold Ramps
  • Non Slip Cold Grip Surface
  • Paver style Ramps Low Loading Angle
  • Power Pack & Air Gauge
  • Water Tanks & Winch