4x8

4x8 - Swing Wing Widening Low loader

Known as the ‘100 tonner’ this design TRT 4x8 widens to any measurement between 2.5m and 4.3m without locking pins. Grade 80 Hi-Tensile Steel Construction Torsional Box designed ‘Link arms’ have minimal flex producing a stiff trailer. Hydraulic suspension is double acting allowing any individual wheel group to be lifted. This assists when changing wheels, servicing or on site situations.

  • Fabricated in Grade 80 Hi Tensile Steel for maximum strength with low tare weight.
  • TIDD® Double Acting Hydraulic Suspension lift any axle
  • Deep Chassis & Coaming for minimal deflection
  • Deck lengths to suit requirements

DOWNLOADS

4x8 - Swing Wing Widening Low Loader with Drop Well

Built to similar specifications as the ‘100 tonner’ this design TRT 4x8 features a drop well deck that enables the trailer to transport over height loads legally. Brake chambers mount directly on the axle/suspension for consistent brake performance throughout suspension travel (Not remote mounted). The hydraulic compensating “live” gooseneck maintains traction over drive axles whatever the terrain.

  • Axles set through deep chassis rails to give lowest deck height.
  • 225mm Drop Well
  • Deep Chassis & Coaming for minimal deflection
  • Ramp options to suit requirements

DOWNLOADS

4X8 BOX BEAM WIDENING LOW LOADER WITH REAR STEER

This TRT 4x8 is designed to widen from 3.1 out to 4.25m. The 3rd and 4th axles are self-steering for manoeuvrability and less tyre wear. The TIDD® Double Acting Hydraulic Suspension enables it to lift any axle. Like all TRT Rows of 8 trailers the brake chambers are mounted directly on the axle/suspension for consistent brake performance throughout the suspension, unlike remote mounted systems.

  • Grade 80 Hi-Tensile Steel Construction
  • Air pinned width positions at 3.1, 3.8 and 4.25m
  • Deep Chassis & Coaming for minimal deflection
  • Deck lengths to suit requirements

DOWNLOADS

4x8 - Fixed Width Low Loader with rear steer

Designed to be used in areas where a wider trailer is unable to access due to narrow bridges or roads. The fixed width deck over the axles gives this trailer complete stability whilst supporting a wide machine. As on all TRT Rows’ of 8 Low loaders, the hydraulic suspension is double acting allowing any individual wheel group to be lifted. A deep coaming rail minimises deflection when fully loaded.

  • Deeper than normal coaming rail reduces deflection when the trailer is loaded.
  • No Deck Lockers Required
  • Steering Options Available
  • Available with compensating gooseneck

DOWNLOADS