Quad Axle 4x4

4x4 Axle Widening Low Loader

Designed to suit 65tonne ATM, this TRT Quad is built using AR450 and Grade 80 Hi-Tensile Steel to deliver a strong trailer with lighter tare weight. For maximum stability, the axles widen with the deck from 2.5m out to 3.5m, with three alternative pin locations, to suit different machine widths. The Gooseneck is designed to transport machines further forward than other makes.

  • Axles set through chassis for lowest deck height and maximum strength
  • Dolly Neck design Gooseneck – Load further forward
  • Double acting TIDD® Hydraulic Suspension

DOWNLOADS

Specifications 224 KB Drawing 57 KB
Drawing 135 KB Axle Widening Flyer 785 KB

4x4 Axle Widening Low Loader with One Rear Steer

For better manoeuvrability and longer tyre life this TRT Quad Axle Widening Low Loader is designed with a rear steering axle. All axles widen with the deck including the split rear steeing axle which is aligned through a hydraulic tie rod. TIDD® double acting hydraulic suspension allows each axle to be lifted individually.

  • Large diameter suspension pivot for longer service
  • Unique hydraulic steering system maintains optimum alignment
  • Double acting TIDD® Hydraulic Suspension

DOWNLOADS

4x4 Axle Widening Lowloader with Two Rear Steer Axles

For better manoeuvrability and longer tyre life this TRT Quad is designed with rear steering axles. Hydraulic steering tie rods maintains correct wheel alignment with deck widening from 2.5m out to 3.5m and intermediate positions to suit machine widths.

  • TRT deep coaming rail for less deflection
  • Unique hydraulic steering system maintains optimum alignment
  • Double acting TIDD® Hydraulic Suspension

DOWNLOADS

4x4 Deck Widening Low Loader with Two Rear Steer

Built with rear steering axles, designed for maximum manoeuvrability around Metropolitan areas and narrow logging haul roads, decks widen over the axles full length. Double fold ramp option allows low ground clearance machines to be loaded, while the Grade 80 steel fabrication keeps the tare weight lighter.

  • Multiple cross members to maintain deck strength
  • Scraper design Gooseneck to load further forward
  • Hydraulic or Air Suspension Options

DOWNLOADS

4X4 MID TIPPING DECK LOW LOADER - ONE STEER AXLE

Built to the maximum dimensions for a 4 axle Trailer as a ‘go anywhere at any time’, this ‘Type 2’ Quad trailer incorporates 1 steering axle as required undercurrent regulations. This trailer is ideal for multiple pieces as well as under permit for 1 large load. The placement of the axles in relation to the forward length allows transport of a 34t machine, with a 120% VAI permit.

  • Longer and deeper beaver tail gives a better loading angle and strength where its required
  • The hydraulic mid tipping Deck is designed for easy access to the top deck.
  • Rear steer axle for manoeuvrability and better tyre life.

DOWNLOADS

Specifications 224 KB Drawings 342 KB
3D Drawing 333 KB 3D Drawing 230 KB

4x4 Mid Tipping Deck Low Loader - Two steer Axles

This TRT Quad is designed for multiple loading or one larger machine; suitable for roading plant or low ground clearance machines. The hydraulic mid tipping Deck is designed for easy access to the top deck. This deck can have up to 12 tonne loaded on it while elevated, or full capacity of the trailer when lowered. Two steer axles for better manoeuvrability and longer tyre life

  • Hydraulic mid-tipping deck
  • Multiple machine loading
  • Option for low angle paver style ramps

DOWNLOADS

Specifications 223 KB Drawings 375 KB
3D Drawings 696 KB 3D Drawings 372 KB

4X4 FIXED WIDTH LOW LOADER - ONE STEER AXLE

Generally designed at between 2.8 and 3.1m wide, this transporter is ideally suited to areas that have narrow roads and bridge restrictions, where a widening trailer may not be suitable. The trailer can be fitted with outrigger options for wider loads. The rear steer axle in this application provides increased manoeuvrability and better tyre life.

  • Axles set through chassis for lowest deck height and maximum strength.
  • Air or hydraulic suspension
  • BPW self-steer axle castor steers in travel mode

DOWNLOADS

Specifications 224 KB Drawings 303 KB

4x4 Quad Options

There are a number of different features and options available for Quad Axle Trailers. Contact our Trailer Team about any questions or added on extras that you may be interested in......

Related News Article

 

  • Widening Stool
  • Double or Single Fold Ramps
  • Non Slip Cold Grip Surface
  • Paver style Ramps Low Loading Angle
  • Power Pack & Air Gauge
  • Water Tanks & Winch
  • Sliding Skid Plate

DOWNLOADS